How to Import a Кран to ОАЭ: G-Mark, ECAS, Jebel Ali and Re-Export Explained
Importing an overhead crane, gantry crane, or электрическая таль into the United Arab Emirates is not the same as shipping to Европа or Африка. The ОАЭ operates its own conformity regime, and the port you choose determines how fast your equipment clears customs. This guide covers the practical steps for B2B buyers sourcing from Китай, with specific reference to G-Mark and ECAS certification, Jebel Ali handling, and re-export options for traders supplying the wider GCC.
Step 1: Confirm Which ОАЭ Conformity Route Applies
The ОАЭ has two parallel schemes, and knowing which one your crane falls under prevents clearance delays at Jebel Ali or Port Khalid.
- ECAS (Emirates Conformity Assessment Scheme) — mandatory for products regulated by the ОАЭ Ministry of Industry and Advanced Technology (MoIAT). Industrial machinery, including верхнеподвесные краны, козловые краны, and hoists, generally requires an ECAS Certificate of Conformity issued through an approved notified body.
- G-Mark — the Gulf Conformity Mark applies to low-voltage electrical equipment and certain other regulated categories. Кран control panels, electrical hoists, and pendant systems often fall within G-Mark scope because they contain low-voltage components.
In practice, a 10-ton LD single-girder overhead crane with an MD электрическая таль may need both: ECAS for the machinery and G-Mark for the electrical assembly. Ask your supplier to confirm the exact HS code and regulated category before production starts. Chunhua Кран supplies CE, CCC, and EAC documentation as standard, and can prepare the technical file needed for ECAS and G-Mark submission on request.
Step 2: Prepare the Technical File Before Shipment
ОАЭ notified bodies want documentation in Chunhua, WhatsApp, CE, CCC, SGS, T/T, L/C, USD, QD, LH, MGH or Arabic. A complete file for a crane shipment обычно includes:
- Design calculations to GB/T 3811 or FEM 1.001, depending on the buyer's specification
- Steel mill certificates for Q345B/Q235B structural sections
- Component certificates for Schneider, Siemens, ABB, or SEW drives and controls
- Load test report and factory acceptance test (FAT) records
- Электрический schematics and risk assessment
- Nameplate and marking artwork showing the G-Mark where applicable
For a QD universal double-girder crane in the 5–150T range, the risk assessment and load test report are the two documents most often queried. Get them signed and stamped at the factory, not after arrival.
Step 3: Отгрузка Into Jebel Ali
Jebel Ali Port is the default entry point for most crane imports into the ОАЭ. It handles навалочный, flat-rack, and containerized cargo, and has direct road links to Dubai Industrial City, Abu Dhabi, and the northern emirates.
Practical points for crane shipments:
- Breakbulk vs. container: A 20T LD single-girder crane can often ship in 40ft containers with the girder split. A 50T LH hoist double-girder or RMG container crane usually moves as навалочный or on flat racks.
- Lashing and skidding: Specify sea-worthy packing with steel skids and V-block cradles. Jebel Ali terminal handling is efficient but not gentle on long girders.
- Customs broker: Appoint a Jebel Ali–licensed broker before the vessel sails. They will file the ECAS certificate, bill of lading, commercial invoice, and packing list in one submission.
- Duty and VAT: Industrial cranes обычно attract 5% import duty and 5% VAT. Re-export shipments may qualify for duty suspension under a customs bonded warehouse or free zone arrangement.
Step 4: Use Jebel Ali Free Zone for Re-Export
If you are supplying cranes onward to Саудовская Аравия, Oman, Qatar, or East Африка, Jebel Ali Free Zone (JAFZA) is the standard re-export route. Goods can be stored, inspected, and re-labeled without paying ОАЭ import duty, provided they remain within the free zone and are re-exported within the permitted period.
For re-export you will обычно need:
- A JAFZA trade license or a free zone company registration
- Re-export declaration filed through Dubai Customs
- Original ECAS or G-Mark certificate, or a valid equivalent for the destination country
- For Саудовская Аравия: SASO/SABER; for Oman: a valid GCC conformity route
Note that a crane cleared into mainland ОАЭ under ECAS cannot simply be re-exported as new without a re-export declaration. Plan the customs status before the vessel berths.
Step 5: Установка and After-Sales in the ОАЭ
ОАЭ end users often require site commissioning, load testing, and operator training. Confirm before purchase whether your supplier provides remote commissioning support or can dispatch an engineer. Chunhua Кран supports overseas installation for overhead, gantry, and light rail systems, and provides a 12-month warranty on standard models.
For spare parts, keep a stock of hoist brake assemblies, contactors, and pendant controllers in Dubai. Lead time from Hefei is обычно 30–45 days for new cranes, but spare parts can move faster by air freight.
Quick Buyer Checklist
- Confirm ECAS and G-Mark scope for your specific crane model and HS code
- Request the technical file and load test report before shipment
- Appoint a Jebel Ali customs broker early
- Decide mainland import vs. JAFZA re-export before booking freight
- Verify destination-country conformity if re-exporting to KSA, Oman, or Qatar
Chunhua Кран supplies верхнеподвесные краны, козловые краны, electric hoists, KBK light rail systems, and industrial манипуляторы to 60+ countries, with no MOQ, a 4-hour quote SLA, and 30–45 day production. For ОАЭ and GCC inquiries, contact WhatsApp +86 193 9277 7259 or email yuhua0095@gmail.com.