How to Import a رافعة to كينيا: KEBS PVoC, Mombasa, and What Buyers Get Wrong
كينيا is one of East Africa's most active markets for رافعات علوية, رافعات جسرية, and electric hoists — driven by warehousing in Nairobi's Industrial Area, port-adjacent logistics in Mombasa, and steel and cement plants in Athi River and Thika. But importing a crane to كينيا is not the same as importing one to أوروبا or the Gulf. The compliance route runs through KEBS PVoC, the entry port is almost always Mombasa, and the inland leg to Nairobi is where budgets quietly break. Here is what B2B buyers need to plan for before placing a purchase order.
Step 1: Confirm Your رافعة Specification Before Anything Else
Kenyan buyers often start with a vague requirement — "a 10-ton overhead crane" — and only later discover the span, lift height, and duty class drive the price more than the tonnage does. Fix these four parameters first:
- السعة and span: An LD single-girder crane at 0.5–20T suits light workshops; an LH hoist double-girder at 5–50T fits general fabrication; a QD universal double-girder at 5–150T is the standard choice for steel mills and heavy assembly.
- Duty class: Intermittent use (A3–A5) allows a lighter, cheaper structure. Continuous production lines need A6–A7, which changes the hoist, motor, and gearbox selection.
- Power supply: كينيا runs 415V/50Hz/3-phase. Confirm this on the datasheet — do not assume a 380V or 440V quote will be corrected for free.
- Environment: Coastal Mombasa installations need upgraded paint systems and corrosion protection; inland cement plants need dust-rated enclosures.
At كرين تشون هوا, quotes are issued within a 4-hour SLA and cover 81 standard models across five categories, so specification can be locked quickly rather than after weeks of back-and-forth.
Step 2: KEBS PVoC — The Compliance Step That Stops Shipments
كينيا requires most regulated imports to pass the Pre-Export Verification of Conformity (PVoC) programme administered by the كينيا Bureau of المعايير (KEBS). الرافعات, hoists, and lifting equipment fall under regulated categories. The practical sequence is:
- Confirm the applicable KEBS standard and route with your exporter before production, not after.
- Book a PVoC inspection with a KEBS-appointed agency (such as SGS, Intertek, Bureau Veritas, or Cotecna) at the manufacturing site.
- Pass the physical inspection and, where required, testing of components and documentation.
- Receive the Certificate of Conformity (CoC), which is mandatory for customs clearance.
Without a CoC, the consignment can be held at Mombasa, subjected to destination inspection at extra cost, or rejected outright. Two details matter most: the CoC must match the actual shipped configuration, and it must be issued before the vessel departs. A crane shipped "pending CoC" is a crane sitting on the quay at your expense.
Ask your supplier which certifications they already hold. Chunhua cranes ship with CE, CCC, and EAC documentation, and the same technical file — GB/T 3811 design calculations, Q345B/Q235B steel certificates, and component documentation from Schneider, Siemens, ABB, or SEW — is what feeds the PVoC inspection. Suppliers who cannot produce a coherent technical file will slow your CoC down.
Step 3: الشحن to Mombasa and the Inland Leg
Mombasa (Kilindini Harbour) is the primary entry point. من Chinese ports — Shanghai, Ningbo, Qingdao — transit is عادةً 20–35 days depending on routing and vessel schedule.
How you ship depends on the crane type:
- فوق الرأس cranes (LD, LH, QD): Usually shipped as knocked-down girders, end carriages, and hoist in 40ft or 40HQ containers. This is the cheapest option and the easiest to clear.
- جسر علوي cranes (MH, MG): Larger spans may need flat racks or ترانزيت شحن غير حاويات. RMG container cranes and shipbuilding رافعات جسرية almost always go ترانزيت شحن غير حاويات.
- Light systems (KBK rails, BZD pillar jib, BX wall-mount jib, MD/CD hoists, DHP chain hoists): LCL or consolidated into a single container with other equipment.
Budget for the Mombasa–Nairobi leg separately. A 40ft container to Nairobi عادةً runs USD 1,200–2,000 depending on carrier and season, and abnormal-load permits are needed for oversize girders. Clearance at Mombasa usually takes 3–7 working days with correct documents: Bill of Lading, Commercial Invoice, Packing List, CoC, and IDF. Delays almost always trace back to document mismatches, not to customs itself.
Step 4: تركيب, الضمان, and After-Sales Reality
Kenyan buyers should confirm three things in the contract: who supervises installation and commissioning, what spares ship with the crane (brake linings, contactors, wire rope, limit switches), and how warranty claims are handled. Chunhua provides a 12-month warranty and can arrange installation supervision; spare parts availability is the difference between a two-day fix and a two-month shutdown.
There is no MOQ, and production runs 30–45 days — so a well-specified order placed today can realistically be on site in كينيا within roughly 10–12 weeks including shipping and clearance.
Quick Checklist for Kenyan Buyers
- Lock capacity, span, lift height, duty class, and 415V/50Hz before quoting.
- Confirm KEBS PVoC route and book inspection before production ends.
- Ship with a CoC in hand — never "pending".
- Budget the Mombasa–Nairobi inland leg and permits separately.
- Verify the technical file: GB/T 3811, steel certs, and brand-name components.
- Agree spares list and warranty terms in writing.
For a specification review or a quote within 4 hours, contact كرين تشون هوا: واتساب +86 193 9277 7259 or email yuhua0095@gmail.com.